Thon Multiflex 1U Modulrack 45 S

10

19" Module Rack

  • Usable height: 1 U
  • Usable depth: 45 cm
  • Made of 15 mm multiplex, dowelled and glued
  • Finish: hard-wearing black lacquer
  • Cable feed at the back
  • Flat rubber feet on the bottom
  • Stackable thanks to milled recesses for rubber feet on the top
  • Suitable for Multiflex road case (Art. no. 168189)
  • 2 x Milled grip recesses on the side
  • Continuous rack rail on the front (optionally available on the back)
  • Exterior dimensions (W x D x H): 532 x 580 x 87 mm
  • Weight: 5.5 kg
  • Colour: Black
  • Includes a set of screws
  • Made in Germany
Available since December 2018
Item number 454706
Sales Unit 1 piece(s)
Height (units) 1 U
Formfactor 19"
Construction Type Modulrack
Vertical Height Units 1 U
Internal Depht [mm] 450 mm
Horizontal Height Units 0 U
Clasps No
Material 15 mm Plywood
Colour Black
External Width 535 mm
External Height [mm] 60 mm
External Depht [mm] 580 mm
Weight 5,5 kg
Show more
$125
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

10 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

stability

handling

quality

7 Reviews

g
Perfect top + side ventilation and access for UAD Apollo X rackmount interfaces
gk5000music 24.01.2022
Well built, well designed and sleek = 100% rating from me.

This rack is perfect as it provides side panel ventilation, a top panel ventilation airgap and rear cutaway access / ventilation while still allowing other studio products (monitors / rack gear) to stack on top - including more Thon Multiflex Rack enclosures.

UAD Apollo x6, x8, x8, x8p and x16 rack interfaces are vented on the top and should not be stacked on top of one another without a sufficient air-gap according to Universal Audio, despite some of their marketing photos to the contrary.

Apollo X Hardware Manual (p.31)
"Apollo X may get hot during normal operation if it doesn’t receive adequate airflow circulation around its chassis vents. For optimum results when mounting Apollo X in a rack, leaving at least one empty rack space above the unit to allow adequate airflow for cooling is strongly recommended."
stability
handling
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
l
1A Verarbeitung, Realitätsnah durchdacht!
lzwicker 07.02.2021
Ich besitze mittlerweile mehrere Modulracks dieses Typs. Sie erweisen sich durch die Aussparung im oberen Teil als äußerst zweckmäßig, da man auch bei kurzen Geräten (z.B. Switchen oder analogem Siderack-Gerät) immer noch sinnvoll an die Anschlüsse kommt, ohne sich dabei die Hand verbiegen zu müssen.
Das ganze ist gepaart mit hervorragender Verarbeitung.
Dieses Produkt wird bei Bedarf jederzeit wieder von mir gewählt werden - es erfüllt 100% die Erwartungen.
stability
handling
quality
0
0
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
n
nico24 18.08.2020
très bon produit pour racker des appareils 1 U très bon produit
stability
handling
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
S
War leider ein Fehlgriff
StevieK 10.02.2022
Für die Bühne gedacht und nicht innerhalb von kleinen, geschlossen Räumlichkeiten. Meine Multiracks entwickelten irgendwelche Ausdünstungen, die nach irgendwelcher Holzbehandlung oder Farbe rochen. Sollte man sich nicht allzulange aussetzen, oder immer kräftig lüften. Stehen jetzt ungenutzt im Keller.
stability
handling
quality
0
0
Report

Report