Start 360°
Loop Switcher for Effects Pedals
- Programmable 10-channel true bypass loop switcher for effects pedals
- Foot switches provide control over 10 independent loops and a separate tuner output
- Extremely simple and intuitive programming
- Link function offers the possibility of connecting two OC10s in two selectable modes (sync, download)
- 70 Freely configurable presets (10 banks, 7 presets per bank)
- 2 Selectable switching modes (Program Mode, Direct Mode)
- Integrated BJF buffer circuit with separate inputs and outputs
- 7 Serial loops and 3 separate loops
- Separate loops can be used as amp footswitches (NO / NC)
- Fully MIDI-capable with MIDI Out and MIDI In / Thru
- True bypass
- 10 Foot switches: PGM1 / L1, PGM2 / L2, PGM3 / L3, PGM4 / L4, PGM5 / L5, PGM6 / L6, PGM7 / L7, Bank Up / L8, Bank Dn / L9, Tuner / L10)
- Link Config switch
- MIDI on / off switch
- 10 Push buttons for programming the presets
- Status LEDs
- 6.3 mm Mono jack inputs / outputs
- 5-Pin MIDI input / output
- Power supply via 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)
- Current consumption: max. 450 mA
- Metal housing
- Dimensions (L x W x H): 110 x 462 x 64 mm
- Weight: 1800 g
Note: Battery operation is not supported.
Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.
Available since
July 2020
Item number
499387
Sales Unit
1 piece(s)
Type
Looper/Switcher
LED Display
Yes
PSU Connector
Yes
Shape
Floor Effects Pedal
MIDI Interface
Yes
