Mojotone ST Blender Prewired Harness

25

Pre-Wired Electronics Replacement Kit for Electric Guitar

  • For ST-Style models
  • Pre-wired electronics kit with the highest quality components, providing a significant improvement over standard electronics
  • The bridge pickup can be blended with the blend control in the neck position
  • In the bridge position you can blend the neck pickup
  • In positions two and four, all three pickups are switched on at the same time with the neck or bridge pickup being mixed in
  • The treble bleed circuit prevents treble loss when the volume control is turned down
  • Suitable for 3 single coil pickups (pickups are not included)
  • Controls: 1x volume, 1x tone, 1x blender
  • Switch: 5-Way
  • Switch positions: 1: bridge (neck can be mixed in), 2: bridge and middle (neck can be mixed in), 3: middle, 4: middle and neck (bridge can be mixed in), 5: neck (bridge can be mixed in)
  • Treble Bleed Mod
  • Made in USA

Delivery contents:

  • 2x CTS 250k custom split-shaft potentiometer
  • CTS 250k split-shaft blender potentiometer
  • 5-Way switch
  • Switchcraft mono input jack
  • .047µf capacitor
  • Pre-tinned, fabric-covered wire
Available since November 2020
Item number 491577
Sales Unit 1 piece(s)
Design Normal
Resistance Value 250 kOhms
Characteristic Curve Logarithmic
Thread Length 6,4 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
Type Switcher
Colour Chrome
Show more
$97
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

25 Customer ratings

4.3 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

17 Reviews

L
Amazing build dedication
LeoS. 12.05.2022
It can be seen that Mojotone puts dedication on small details, like how to carefully solder and route the cables and choose the right pieces. The kit in general sounds really good, it´s easy to install (you need to solder the pickup cables anyway) and has amazing quality for the selected CTS pots and 5 way switch. Cannot complain. It works very well with high-end Strato pickups like Lindy-Fralin.
quality
0
0
Report

Report

L
Simply top
LeonardS 04.10.2022
This kit uses the best components around and the soldering is first class.
Fitted my Stratocaster pick guard perfectly.
I found the possibility of blending the neck and bridge pickup a nice feature to have (positions 1 & 5) or all three pickups (positions 2 & 4) together.
Made in USA, documentation and instructions in English are included.
I certainly could make it cheaper myself, but not better nor faster.
quality
0
0
Report

Report

G
Overall very good
GeorgeK26 10.08.2021
I would wish if the blender pot was a bit more responsive.
Overall works better with the higher output strat pickups
quality
1
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
H
Wertig
Heinar 28.04.2021
Für das Geld erhält man aber eine ordentliche Aufwertung der Potis und des 5-Wege-Schalters aus dem Hause Fender.

An denjenigen, der vor der Wahl steht, ob vorverdrahtetes Set oder Einzelteile:

Die vorverdrahtete Variante erspart dir auf jeden Fall Zeit. Wie viel Zeit hängt natürlich von deinen Lötfähigkeiten und Equipment ab. Mir persönlich war es das zumindest wert.
Die Mühe zu prüfen, ob es nun 250K-Potis sind etc. hab ich mir nicht gemacht. Der Bumms fühlt sich wertig an und gut ist.

Eine klare Kaufempfehlung!
quality
2
0
Report

Report