DSM & Humboldt Simplifier Bass Amp/Cab Sim

34

Effect Pedal for Electric Bass

  • Preamp and speaker simulator
  • Can be connected directly to an FOH or recording mixer
  • Fully analog pre-amp based on the Ampeg SVT with gain, level and 3-band EQ with semi-parametric center control
  • Parallel signal routing with selectable LPF
  • Dual FX loop (for preamp and parallel signal)
  • Analog cabinet simulation with 3 voicings: 8 x 10", 1 x 15" & 4 x 10" with microphone position and resonance controls
  • Controls: Gain, Volume, Preamp Blend, Bass, Mid, High, Mic Position, Resonance, Cabsim Blend, Phones Level
  • Mid Freq switch: 900/400/1500 Hz
  • Switch parallel LPF: 100 / Off / 500 Hz
  • Switch Cab Size: 4x 10"/ 8x 10" / 1x 15"
  • Speaker Colour switch: Bright / Modern / Warm
  • Switch for parallel phase and ground lift
  • LED: On
  • Input: 6.3 mm jack
  • Thru / Out: 6.3 mm jack
  • DI Parallel: XLR
  • DI Out: XLR
  • Preamp FX Send & Return: 2 x 6.3 mm jack
  • Parallel FX Send & Return: 2 x 6.3 mm jack
  • Aux in: 3.5 mm stereo jack
  • Phones: 3.5 mm stereo jack
  • Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
  • Current consumption: 80 mA
  • Power supply via 9 V DC power supply (not included - suitable power supply: Art.409939)
  • Dimensions (W x D x H): 115 x 65 x 55 mm
  • Weight: 430 g
  • Made in Chile

Note: Battery operation is not supported.

Available since November 2020
Item number 496650
Sales Unit 1 piece(s)
Design Floorboard
Tubes No
Amp Modeling No
Integrated Effects Yes
Headphone Output Yes
Direct Out Yes
MIDI Connector(s) No
Integrated Expression Pedal No
Connections for Pedals or Switches No
Aux Input Yes
Integrated Tuner Yes
USB Connection No
Effect Types Speaker Simulation
Channels 1
Active / Passive Active
Gnd/Lift switchable 1
Speaker Simulation 1
Show more
$269
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

34 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

features

sound

quality

29 Reviews

J
Good but with problems
Joyscoop 07.01.2023
I bought this device in order to improve articulation, presence and the "funkiness" of my basses. I only play at home and plug the bass directly into the interface and at times the sound is muffled or not clearly defined, and I've tried many basses, various pedals like expanders or compressors, and none of them really did the trick. So after hours and hours of research and watching videos and reviews etc I decided to experiment with this one.

There are two separate stages in this device: the pream and the cab sim. I've got one serious gripe with each of them, and then a third one that is about the device as a whole:

1. About the preamp, the mix knob ("dry"<->"wet"), when turned fully left, i.e. in the completely "dry" position should only reproduce the sound of the bass without any alteration. But this isn't so - you can clearly hear that the sound is affected by the circuitry: the accentuated mid-highs can be heard and different dynamics can be felt. So it's like if you plug the bass into the device you can't have totally clean sound. A big bummer for me. Thankfully I managed to improve the situation by this trick: I used the effects loop to invert the mixing potentiometer: I used a couple of patch cables to send the "send" of the parallel to the "receive" of the preamp and the "send" of the preamp to the "receive" of the parallel. This changed things for the better and although the preamp knobs need to be turned much higher to get the same volume of the preamped sound, it cleared-out the parallel signal and it's now much closer to the unaffected sound.

2. The cab sim is very impressive in its realism but the choices of cab and speaker sizes is limiting. I would like there to be something with tighter sound, like 2x12 or 1x12. All offerings leave this "big sound" kind of feeling that is not always good or wanted. I haven't solved this - I just don't use the cab sim very much.

3. If you have a sound with a mix of preamp and parallel sound there is no single knob that can adjust the volume of the mix. If you adjust the existing volume knob, it only increases the preamp side of the sound, not the overall mix, so if you want to do this you must increase the volume with the knob, and then alter the balance on the mix knob. Fiddly and doesn't guarantee that you'll have the exact same tone as before. So, in order to do this with a single knob and keep the exact same tone every time, you need a separate booster/volume adjuster pedal, especially if you use a passive bass and don't want to mess with its volume knob, which affects the tone.

As a final conclusion, after the trick with crossing/inverting the "sends" & "receives" on the effects loops, the device does what I want it to do and fulfilles its mission, as the sound is good - crunchy, articulate and "live". So the question is: is it worth the price. In all honesty, if you don't really need the cab sim, no. It's crazy expensive at 299. So, normally I would return it but I decided to keep it because it eventually does what I want it to do (albeit with the trickery described above) and I have grown tired of buying pedals in order to reach a particular type & quality of sound.
features
sound
quality
9
1
Report

Report

OR
Neutral amp/cab
Oskar Rolstad Buvarp 09.03.2022
This is a very versatile tool for shaping and tayloring your desired bass-sound, with options and solutions to a wide variety of setups. Fantastic multifunctional tool for bass. I have used it with gitar once in a live-situation. Sounded deep and wonderful! It is supposed to be an Ampeg SVT amp, if i remember correctly....

I also bought the tech 21 VT bass, also an Ampeg SVT simulation, and its a much more aggressive and «fun» tool. I ultimately ended up using the tech 21 all the time, because its easy to use, and sounds insanely cool.

If you like versatility, go for DSM. If you like rock and metal, definitely go for tech 21(tech 21 runs on phantom-power...... its just super easy every time)
features
sound
quality
6
1
Report

Report

B
The improvement on passive basses is amazing!
Bassguitar&Piano 16.09.2021
DSM Noisemaker and Humboldt Electronics have created something quite unlike anything on the market. Due to its size and the amount of functionality built in, it is a game changer. It sounds great.
You can use a compressor on the parallel fx loop so the low end gets compressed, but the preamp signal keeps its dynamics.
Is it difficult to use? Well, yes... and no. It becomes more intuitive as you use it.
features
sound
quality
2
1
Report

Report

T
The sound of this sim is great! The size of the switches and knobs can be...
Timte 02.02.2023
Great amp sim. I use it in the studio and live (direct into the PA). Haven't had any issues yet! The closeness of the knobs and the size of certain pins/switches can sometimes be a bit iffy for my chubby fingers, but over all I love it :)
features
sound
quality
1
0
Report

Report

YouTube on this topic