Adam Hall 34725 B Trolley 3-stages

7

Trolley with 3 Stages

  • Three-step pull-out handle with locking button on handle
  • Length: 380 - 960 mm
  • Handle is hooked into two supplied plastic holders on case
  • Mounting plates are compatible with handle 34725 so that existing older handles can be replaced 1 to 1
  • Handle made of black plastic
  • Extensions made of black aluminium
  • Max. load capacity: 25 kg
  • Weight: 1.72 kg
Available since March 2020
Item number 482717
Sales Unit 1 piece(s)
$101
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

7 Customer ratings

4.3 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

5 Reviews

d
Would not recommend to a friend.
dBreeze 10.04.2023
#1 – primarily, very few will have the skill, tools, and patience to get this mounted correctly (more on this below).
#2 – No support, no instructions, no mounting template, no mounting hardware.
#3 – Seems flimsy. Mounts with (user-supplied) 6x30 bolts – so a lot of force relying on a thin, long bolt. Telescoping handle has a lot of flex to it, doesn’t really instill confidence for a long life.
More on mounting issues: granted every installation will be slightly different depending on the cabinet and the user’s needs. However, the two brackets that are permanently bolted to the cabinet must be, in all cases, carefully aligned for the trolley to attach properly. It is extremely difficult to insure proper orientation and spacing for these two brackets. The tolerance for error here is quite small, approximately +/- 3mm. The obvious solution would be to have a single mounting apparatus that would ensure the trolley-brackets are both parallel and the correct distance – this way, even if the mount is crooked, the trolley would still attach.
I noticed another reviewer said to ‘lay the assembly (trolley with two brackets) on the cabinet and mark.’ Unfortunately, the trolley blocks access to 5 of the 6 the bolt holes, so you can’t mark their location accurately. The brackets are irregular and access is limited, so it isn’t possible to get any kind of marker into position while the trolley was there. (I think this technique might work on a home-made cabinet, before assembling the box, but on a store bought cabinet it will not.)
You also need to determine the correct placement of the bottom bracket so that the wheels have appropriate clearance; again, I was fairly surprised that the manufacturer gave no guidance for this.
This detachable trolley is really interesting idea, and I hope they make it useable soon. In the meantime, I’m going back to my hand-truck and bungee cords.
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
M
Damit rollt (fast) jede Box
Martin1965 23.03.2020
Habe mit dem Trolley meine echt schwere Selbstbau-Bassbox (1x 15", 22 Liter netto, 25mm HDF) rollbar gemacht.

Der Trolley kommt mit 2 Leisten zur festen Montage an der Box und dem eigentlichen abnehmbaren Trolley-Teil daher. Die beiden Leisten werden übereinander montiert und der Trolley von oben in die obere Leiste eingehängt. Dann kann mit Hand oder Fußspitze die Verriegelung unten geöffnet und damit der untere Teil des Trolleys angeklappt werden. Fertig zum Rollen! Die Größe der Rollen ist SUPER und es können damit keine Steinchen oder Ähnliches die Rollen mehr blockieren, wie bei den günstigeren Modellen mit KLEINEN Rollen vorkommen kann. Wer hier spart, zahlt unter Umständen 2x (so wie ich :-)

Die Montage geht trotz fehlender Montageanleitung schnell von statten. Die Box aufs Gesicht legen, beide Leisten in den Trolley-Teil einhaken, auf die Rückseite der Box auflegen und anzeichnen. Bei Boxen mit ordentlich dichtem und dicken Holz genügen Holzschrauben zur Befestigung der Leisten (vorbohren). Für dünneres Material liegen passende Gegenstücke für die Leisten dabei. Die Befestigung erfolgt dann z.B. mit Gewindeschrauben und Muttern und dem Gegenstück auf der Innenseite der Box. Mit Akkubohrer und -schrauber ist das in 5-15 Minuten erledigt.

Ich kann das Teil bedingungslos empfehlen.
quality
2
0
Report

Report